Watch: the traffic pattern and left base
Follow the airplane around the pattern. Tap Play, or step through one leg at a time.
Wind sock, runway numbers, threshold, aiming point, PAPI lights and the airport beacon are on the picture. Tap one to learn it.
- The large end of the wind sock points into the wind. It shows wind direction near the runway in use.
- The number is one-tenth of the runway's magnetic heading, rounded to the nearest whole number, read from the approach direction. The two ends of one runway differ by 18. Letters L, C and R separate parallel runways.
- Eight stripes along the runway centerline, or fewer on narrower runways. They mark the beginning of the runway that is available for landing.
- Two broad white stripes, one on each side of the centerline, about 1,000 feet from the landing threshold. They give you a visual aiming point for landing.
- A single row of two or four light units, normally on the left side of the runway. They give you a visual glide path. They can be seen about 5 miles by day and up to 20 miles at night. Do not start down until you are lined up with the runway.
- A white and green flashing beacon marks a lighted land airport. Green alone also marks a lighted land airport. White and yellow marks a lighted water airport.
Why left? Unless the airport says otherwise, all turns in the traffic pattern are made to the left. On charts, a right pattern is marked RP. Left base is simply the base leg of a left pattern.
Sources: FAA Aeronautical Information Manual: 4-3-3 Traffic Patterns, 4-3-4 Visual Indicators, 2-3-3 Runway Markings, 2-1-2 Visual Glideslope Indicators, 2-1-9 Beacons (2026 edition with changes 1 to 3). Diagram not to scale; the airport's own procedures and your instructor come first.
Voice is your phone's built-in voice, so it may sound plain. A recorded narrator can replace it later.